PS5 Pro HDMI Repair on Long Island: No Signal & Costs

Your PS5 Pro powers on, but the TV shows no signal — or the picture drops out just as a game starts. A damaged HDMI port is one possible cause, but the cable, TV input and video settings can produce similar symptoms. JWS Electronics Repair in North Babylon starts with diagnostics rather than assuming an expensive console needs an expensive motherboard replacement.

Common PS5 Pro HDMI symptoms. Watch for a black screen despite a steady white power light, intermittent audio and video, sparkles in the picture, or a connector that looks loose or pushed inward. A drop, cable tug or moving the Pro with HDMI still connected can bend pins or crack solder joints. If the port is visibly damaged, stop plugging cables into it. Holding the cable at an angle can turn a connector repair into torn motherboard pads.

Rule out the high-bandwidth setup first. PS5 Pro owners may notice a stable home screen but dropouts when switching into 4K, HDR, VRR or a supported 120 Hz game mode. That does not prove the port is broken. With an undamaged connector, test a known-good Ultra High Speed HDMI cable directly to a compatible TV input, bypassing receivers, switches and capture devices. Confirm the TV input supports the selected mode. If lower-resolution output works but higher-bandwidth modes do not, JWS checks both the display chain and console signal path before recommending soldering work.

Why the Pro needs model-specific attention. PS5 Pro is not simply an original PS5 in a different cover. Its internal layout and board revision must be identified before choosing a replacement connector or following a disassembly procedure. The presence or absence of the optional disc drive does not identify the cause of an HDMI fault. A visually intact port can still have damaged solder connections or a fault elsewhere in the HDMI circuitry, so blindly replacing the connector may not restore the picture.

How much does PS5 Pro HDMI repair cost? JWS lists standard PS5 HDMI service starting at $125. Treat that as a starting reference, not a confirmed PS5 Pro price: the Pro requires a model-specific quote after inspection and a parts-availability check. A port-only repair differs from work involving lifted pads, damaged traces or HDMI signal components. Diagnostics are free, and JWS explains the total and expected turnaround before you approve the repair. Ask about any express-service fees rather than assuming they are included.

The repair process. First, JWS tests with known-good equipment and inspects the HDMI connector under magnification. If replacement is needed, the console is carefully disassembled, the damaged port is removed with controlled hot air, and the board pads and anchors are inspected and prepared. A compatible connector is aligned and micro-soldered in place, with checks for bridged pins and damaged connections before reassembly. Board-level faults are assessed separately instead of hidden behind a port-swap quote.

Testing matters as much as soldering. A working boot screen alone is not enough for a Pro used with a high-refresh display. Post-repair testing checks stable video and audio at multiple resolutions. Tell JWS if the original fault appeared with 4K, HDR, VRR or 120 Hz so the applicable modes can be checked with compatible equipment. Repair does not add display features that a TV or game does not support, and no turnaround should be promised before parts and board condition are confirmed.

Local PS5 Pro repair on Long Island. JWS brings console HDMI and motherboard micro-soldering expertise to 1167 Deer Park Ave in North Babylon, serving Deer Park, West Babylon, Bay Shore and customers across Suffolk and Nassau counties. Review the PS5 HDMI repair service, request a PS5 Pro quote or book an inspection. If you cannot visit, start a mail-in repair request and identify your console as a PS5 Pro. Have a Slim instead? Read our PS5 Slim HDMI repair guide.

Need help with this repair?

JWS can inspect the device, explain options and provide a quote before work begins.